Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

BRP XD100 in Yam 2-stroke

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BRP XD100 in Yam 2-stroke

    Has anyone tried to use XD100 in their Yamaha. It's supposed to smoke less then regular TC-W3. it's a "god" synthetic oil, can't do any harm or can it?
    Dont mind the Swedish spelling!

  • #2
    Should not harm a thing. Meets Yamaha's TC-W3 requirements.

    Most Yam drivers over here across the pond that want their Yams to smoke less and to foul their plugs less use Pennzoil 100% synthetic or semi-synthetic. Can be found here for a good bit cheaper than XD100 oil.

    Comment


    • #3
      Thanks for the answer. Some places here carry Pennzoil but it's not easy to find. I have a BRP dealer close to my summerhouse hence the XD100 even though it's a bit more expensive. It shall be interesting to see if there's any difference in smoke.
      Dont mind the Swedish spelling!

      Comment


      • #4
        Well the XD100 works fine and the exhaust boss seems cleaner then before. But the engine still smokes too much and uses a lot of oil(in my opinion). I checked the factory manual for the oil pump adjustment and it said that the lever should touch the pin with the throttles fully closed. Mine has a gap of 2-3mm. The manual I have is for a 1999 engine and my is a 1995. Is it the same setting? I know things differs between the years (the powertrim assembly for example).
        Attached Files
        Dont mind the Swedish spelling!

        Comment

        Working...
        X