Need search guidance

[sevcairo2k]

How would i search for finding threads related to outboard engine cranking up but no spark from the spark plugs. Need to find the right words for searching the related thread. Engine is a 200HP 1999 two stroke carburated Salt Water series II.
Thanks for taking the time to reply to this question.
Sev

[99yam40]

my thoughts would be your complete motor model # with no spark

[sevcairo2k]

thanks will do when i get home.

[sevcairo2k]

1999 sx200txrx no spark

Please help i don't have a clue. 1999 sx200txrx with no spark.

[zenoahphobic]

Please help i don't have a clue. 1999 sx200txrx with no spark.

I see your problem. Just type in No spark in field and see a whole lot of threads relating to a lot of different engines where spark may have been an issue.

[rodbolt17]

then do you have a digital multimeter?

do you have a service manual?
do you have any knowledge of basic DC circuits?

[sevcairo2k]

Thanks for your replies. I do have a multi meter and basic electronics back ground. With a little help i know i can figure this out.
Regards,
Sev

[99yam40]

then do you have a digital multimeter?

do you have a service manual?
do you have any knowledge of basic DC circuits?

Rodbolt asked 3 questions not just 2

[sevcairo2k]

Sorry no I don't have a service manual.

[99yam40]

need to get one , as it has all the specs and procedures for your motor.

I do not have a manual for your motor, but I do not have the motor either

[sevcairo2k]

Thank you so much for your help. I know now where to look and what I need to get the job done. Thanks to all the senior members who always come to the rescue.
Sev

[rodbolt17]

ok
the SX200TXRX.
means its a saltwater series EFI 200.
no carbs.
means its a 3.1L.
that means it uses 6 pulser coils as triggers that use a common ground.
lose the pulser ground and you lose all 6 sparks.
the stator charge coils are left bank right bank.
lose a charge coil and you lose 1 bank.
a grounded stop switch will kill all 6 but the alarm should sound when cranking,if the alarm works.

google CDI electronics for a decent testing guide.

[sevcairo2k]

Thank you sir. I will start troubleshooting tomorrow.