If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
There is no dedicated wire for the hour meter on a 6Y8 gauge.
Black is ground. Red is 12 volts. Blue and white are for digital data. All data that can be seen on the gauge comes up the blue and white wires.
If you have pixels that are coming and going I would suspect a defective gauge. Like having a digital alarm clock and part of the 8 is missing or intermittent.
Comment