YDS, version 1.33, diagnostic question

[scottcmb1965]

Link for Instruction Manual:
http://www.orebrobildiagnos.se/OBD2/...ion_Manual.pdf

Scott,
Let us know how it works w/Windows 10, or what you had to do to get it work.

When i get home from work tonite i will post up a link to the company you can download the latest chipset drivers from. ( I cant remember off the top of my head right now)

I have been using the YDIS 1.33 on Windows 10 platform for the past year and it has been working flawlessly...... but in the beginning i had to install the latest drivers into Windows 10 to get the OBD2 dongle to communicate. Nothing difficult.... there also "MIGHT" be another settings changes you may have to do in the USB settings which is pretty easy.

Will post back later with the link.

Cheers
Scotty

[scottcmb1965]

Link to latest Windows 10 or earlier drivers

Ok.... he is the link to where you can download the latest USB drivers for the YDIS Dongle. Its obvious as to which download to select.

D2XX Direct Drivers

Hope this helps everyone.

Cheers

Scotty

[cpostis]

Townsends (Scott),

How'd this work out for you?

[TownsendsFJR1300]

Townsends (Scott),

How'd this work out for you?

We installed the program in the lap top but didn't have time to
plug into the motor. My neighbor should be back in a couple of weeks
and we'll try plugging it into the engine.

[99yam40]

what happened ? It should not have taken very long to load it up and hook to your motor

Are you afraid to hook it up to the motor yourself to see if it will communicate?

[TownsendsFJR1300]

what happened ? It should not have taken very long to load it up and hook to your motor

Are you afraid to hook it up to the motor yourself to see if it will communicate?

Sacktly!!!

[pstephens46]

Sacktly!!!

Cmon dude! I did have to change the com port setting on my lap top to make it work. Apparently it stuck as I didn't have to change it again.

[TownsendsFJR1300]

Patience Grasshoppers!!! Soon....

[pstephens46]

Scott:

Did you ever get 1.33 to work?

[TownsendsFJR1300]

Scott:

Did you ever get 1.33 to work?

Got it downloaded to the lap tap but I haven't plugged it into the engine yet..

When my computer GURU neighbor was down last month, I wanted him around when playing with it. He was super busy and we never got to it...

I'm pretty good on the puter, but I'd rather have another set of eyes so I don't screw anything up on a great running engine...

[rodbolt17]

there is nothing on the engine you can alter with YDS.
the ECU cannot be changed with YDS.
plug it in.
turn the key on.
hit the button.
you will be disappointed as it wont show anything wrong unless there is a running issue.
you may see a shift position code. clear it or not.
most times it got set cause someone revved the motor in N.

[TownsendsFJR1300]

there is nothing on the engine you can alter with YDS.
the ECU cannot be changed with YDS.
plug it in.
turn the key on.
hit the button.
you will be disappointed as it wont show anything wrong unless there is a running issue.
you may see a shift position code. clear it or not.
most times it got set cause someone revved the motor in N.

Easy enough. Does the engine need to be running for THIS plug in test?

I know checking IF the ISC is working, the engine needs to be running (wet) so when "toggled" the idle goes up and down(I watched my master tech do that a couple years ago)..

[pstephens46]

You can get some data with key in on position. Codes and hours at various speeds. Running, more data.

[TownsendsFJR1300]

I'll plug in later today and post back.

[99yam40]

I would think a print out of when the motor was running good might give some good reference info if you have a problem and you want to see what changed