yam p65 outboard info

[foomanchoo]

hello!!
just got a yamaha p65 outboard and it looks like i may need a new tank and fuel dirt trap(the little plastic peice that screws in below the fuel on off can anyone point me in the wright direction, or any other info wld be much appreciated.

[boscoe99]

A P65 appears to never have been offered here in the USA. More than likely it is the equivalent to the P60 that was offered.

You might see these illustrations to determine if any of the parts for the P60 will work with your P65.

1991 P60TLHP Yamaha Outboard FUEL TANK Diagram and Parts

1991 P60TLHP Yamaha Outboard FUEL SYSTEM Diagram and Parts

Finally, here is the link to the Yamaha USA parts book that depicts the latest fuel tanks, hoses and such that might work with your motor.

2015_Yamaha_MRP

[foomanchoo]

thanks for the info
it doesnt look like the p60 is like the 65 maybe eu only , the number on the unit
is (s25884) it has a steel tank

[boscoe99]

thanks for the info
it doesnt look like the p60 is like the 65 maybe eu only , the number on the unit
is (s25884) it has a steel tank

A tank is a tank is a tank. Yamaha brand or non-Yamaha brand for a Yamaha motor.

Many years ago steel tanks was all there was to be had. Most, if not all, have been replaced by plastic. Ever heard of the movie "The Graduate". Plastics are the future. Plastic is lighter. Plastic does not rust. Plastic does not damage the boat. Plastic is not as prone to condensation. Oh, it does swell up a bit if the vent is closed and the pressure changes.

What is the complete serial number of your motor. Begins with a 6.

[foomanchoo]

Thanks for that trouble is the starting cord is part of the tank
regards!

[boscoe99]

What is the complete identity of the motor? Starts with the number 6.