Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

1998 Yamaha 115 trim gear pump removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1998 Yamaha 115 trim gear pump removal

    Replaced trim ram seal, and wanted to replace filters in gear pump. It separated hard because of corrosion, and a small part fell before I could see where it came from. It looks like some kind of restrictor, and its not on the exploded view. Can anyone tell me which hole it fits in?
    Attached Files

  • #2
    be aware there is a valve assy consisting of a metal ball,a pin and a body. they are not sold sepratly and easy to lose a part.

    Comment


    • #3
      Thanks, I can see that one in the diagrams, but no matter where I look, I don't see that restrict or. I have the right manual for the 98, but its not there. My only guess is that the original was replaced by one from a differnt year.

      Comment


      • #4
        nope.
        its either there or you lost it.
        trust me, it drops out easily.

        Comment


        • #5
          Might it be item 15 in this illustration?

          2003 115TXRB Yamaha Outboard POWER TRIM TILT ASSY 2 Diagram and Parts

          There is a better illustration shown at Yam USA's website but you have to navigate to get there, where it shows up as item 16.

          http://yamahamc.partsandwarranty.com...1408539&Page=1

          Comment


          • #6
            item 15 does contain a pin and a ball that fall out easily.
            they go hide quickly.

            Comment


            • #7
              if you look at trim assy 1 you will see where the OTHER pin and ball goes.

              Comment

              Working...
              X