1988 yamaha 70 hp etlg carburetor problem. .

[chummy70]

Top carburetor is blowing fuel out and choking out the motor were it won't go. I put a rebuild kit in it and is still flooding it out here is what I changed.
gasket,gum cap, valve seat 01.4 float valve, clip, valve pin, float comp, arm pin, flot/c washer, o ring, packin screw pilot, ajast screw, o ring..
Is there something that didn't get replaced that is causing it to flood out or is it time to replace it..? Any help is greatly appreciated thank you..

[ausnoelm]

Need a better explanation of "blowing fuel out" do you mean leaking? Fuel actually being "blown" out the throat?

[chummy70]

It's blowing out kind of like spitting out way more than the lower 2. And fills the bottom off silencer with raw fuel.

[99yam40]

reeds may be not seating well or cracked/broken

If the needle and seat do not shut off fuel into the bowl of carb then fuel would run out the vent or through the inside of carb, but I would think it would be sucked into the motor not blown out of carb