If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Can you tell me if there is a seal between the carbourator and the engine in my yamaha 9.9hp FMH 2 stroke outboard engine serial no 682C/L/469553. year 2000
please
Regards
Last edited by Amoriafr110; 08-17-2015, 10:01 AM.
Reason: adding further info
I went to the Yam parts catalog and damn if I could find a seal, gasket or any part that is used between the carburetor and the reed valve assembly. Looked at an SM and also no part is shown. I wonder if this is why the OP is asking.
Exactly the problem i,m having, i get my spares from a company called Pacermarine and they could not find any mention of a gasket for this engine.
I thought there had to be a gasket so joined this forum for info.
This is for an engine i got which i have no idea of the history. it starts ok with revs on but not in the starting position, when i take revs of it stops. I checked all the usual possible causes and everything seemed to be fine so i took off the carbourator and there was no main seal between the carb and engine, there was some residue of instant gasket so i think the previous owner has had this problem of not finding a gasket for this engine.
Do you know a part number for this gasket?
Comment