Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Yamaha 90A Gear Case Plate

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Yamaha 90A Gear Case Plate

    I am servicing the whole lower unit.

    Any ideas on how I am going to get this off without breaking it?

    It's old brittle plastic - been on there at least 5 -10 years - maybe never changed ever.

    I give my chances as very low to none - I have aleady broken the base plate for the water pump that was fused in...

    Maybe I should just buy a new plate and accept my fate.

    Cheers

  • #2
    looks like the shift shaft seal housing to me.
    which one of these 90s Yamahas do you think it is? Yamaha - Outboard - 90HP OEM Parts | Boats.net

    on my C40 I drilled a couple of holes into it, screwed some screws into those holes, and pried the housing out using those screws.
    bought a new housing with seals
    Last edited by 99yam40; 05-17-2022, 01:56 PM.

    Comment


    • #3
      Originally posted by 99yam40 View Post
      looks like the shift shaft seal housing to me.

      on my C40 I drilled a couple of holes into it, screwed some screws into those holes, and pried the housing out using those screws.
      bought a new housing with seals
      ^^^^ Exactly how I did mine on my 90TLR^^^^ Was pretty simple. Mine had been on there much longer than 5 years and in Salt water too...

      Comment

      Working...
      X