Yamaha F250 DET 2014 Rigging Help no crank

[boatserv]

Hi All,

Looking for some help, bought a F250 2015 with electric shift with 200 hours on. We ordered a rigging kit seperately, 6Y8 Hub, key switch, wiring look, electronic top mount throttle and a 6yC display. We got everything rigged up however it wont start. I have confirmed the started is working and we have 12.4v at the engine and trim etc work but it will not crank or start on the key. Is there something I need to do as far as calibration for the shift actuator for a new install?

[boscoe99]

New engine to new control box, all is well.

Used engine to new control box, no workee.

The engine needs to be paired with the new control box. Requires a reset using YDIS.

[boatserv]

Many thanks for your help, I was starting to thing this might be the case.