1994 L200TXRS Yamaha Outboard LOWER CASING

[MID FL CAP]

Hello, I have to replace the prop shaft seals in this motor. Is it straight forward as I have been reading, break out nut , replace the seals and the o-ring, replace broken nut. or is there more involved? I have done every thing else on the top end,shift shaft and driveshaft seals and O-rings. Thanks.

[99yam40]

need to pull the carrier and then the seals out of the carrier.
measure the depth the seals are set in if you do not have the special tool to set them in with.
The carrier can be a pain to get out as well as the nut