yamaha 75 hp and Command Link digital gauges

[michalzubek]

Could anyone please help me with the connection of my yamaha 2 stroke 75 hp from 2011 CETO L to Command Link tacho (Part no: 6Y8-8350T-0) and fuel manager (Part no: 6Y8-8350F-01)?
I have 1 bus bar and I do not know how to connect all each other
It should be connected somewhere to the engine or all cables are in control (703)?

[boscoe99]

Here in the US only EFI four strokes and HPDI four strokes have Command Link capability. 2006 and later.

This document depicts rigging for US model CL motors.


2015_Yamaha_MRP

[michalzubek]

So are we talking about 6Y5-835 series gauges?
Are they the same as 6YR-W0035-M6-00 ?

[boscoe99]

I thought you were asking about 6Y8 gauges.

Gauge prefix is usually 6Y5, 6Y7, 6Y8, 6Y9, etc.

6YR is normally a gauge kit that will contain a gauge or gauges.

What is it that you want to do?

[michalzubek]

I have bought recently Yamaha 75 CETO L and I would like to connect gauges to it.
I, also, bought gauges 6Y8, but it seems they are wrong and won't work with my engine.
I would like to know which of them will work, what parts/cables I need and how to connect them to make them work.
By the way thank you for your help....

[boscoe99]

Being a two stroke and not an hpdi kind I am guessing that either the 6Y5 or the 6Y7 gauges will work. If the motor is 2006 or later then go to the Yam rigging book referenced and see what is available and how it gets connected.