Tweet
After using it a bit, it boggs at full throttle , then after an hour after that , it boggs at the first click after going from neutral to forward , just as if it is a barrier that stops it or that it does not get enough petrol. First it was petrol from one of the screws from the lower cylinder in the float chamber/carb, I have screwed it in properly and it is completely tight. It also makes a strange noise that I have never heard before when I start it, it has also become heavier to start .last year I pulled it on maybe 3-4 pulls, now maybe 10-11 pulls with choke and gas .Now I do not know what happens, it stops completely but I think it gets too hot so that then the S.L.O.W Mode gets activated. i also noticed 2 wires that sticks out of the top cylinder that might be the temperature sensor but it is not connected ? and yes i have cleaned the carb and changed plugs.
Comment