Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

F90 tilt/trim problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F90 tilt/trim problem

    I have a F90TLR. it is 3 years old, has 154 hours.

    The tilt/trim motor works fine.
    The Relay is new (off a new engine) and working.
    The Relay Clicks but will not activate the tilt/trim motor.

    I need some help trouble shooting this problem.

  • #2
    are you trying to say the relay works just fine on a different motor but not yours?

    If so then a voltmeter can be used to check to make sure where you are loosing the pos or neg
    Last edited by 99yam40; 04-19-2015, 05:08 PM.

    Comment


    • #3
      Pull, inspect, clean and tighten ALL electrical connectors from the battery back to the starter. Including all grounds.

      Just looking at and stating all connections are fine, DOES not count.

      As noted above, you have a bad electrical contact somewhere..
      Scott
      1997 Angler 204, Center Console powered by a 2006 Yamaha F150TXR

      Comment

      Working...
      X