Tweet
I have a 2002 vmax 225 ox66 last fall i hit a rock and had new lower unit installed had to put in storage with out running it. Due to work i finally got to take it out last month for the first time. My water pressure will get up too about 15 psi then drop to zero when i get up on plane. When im at idle the pressure seems low and it doesn't stay steady i seem to have a strong tell tail stream. I replaced the thermostats cleaned the poppet. Im about to put in new water pump kit and poppet. I pulled the thermostats and ran it. Water flows out of the thermostat ports so i dont think there is any blockage. Anything i should look for? The motor height is still the same as before. I did get temp alarm Thanks