Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Single 704 binacle tension adjustment

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Single 704 binacle tension adjustment

    Since my boat is still down do to the fuel issue I'm running my dad's Bennington Tritoon. It's got a '16 F150 on it. The issue is that you have to hold your hand on the throttle control at all times while under way, unless running WOT. Even in smooth water the throttle will slowly back off and it's very annoying. Is there a way to tighten the resistance on this binacle so it won't fall back automatically?

  • #2
    https://www.performanceoutdoors.net/...maha-150.6577/
    Scott
    1997 Angler 204, Center Console powered by a 2006 Yamaha F150TXR

    Comment


    • #3
      Originally posted by OneStepSally View Post
      Is there a way to tighten the resistance on this binacle so it won't fall back automatically?
      Yep.
      As you stand at the helm,
      down low of the base of the remote control facing you,
      is a rubber plug.
      Pop that out, inside you'll see a slotted head screw - that's the tension adjust.

      Comment


      • #4
        That was exactly where it was. Thanks guys.

        Comment

        Working...
        X