Hello all! Pretty new to ownership but a long time co-captain - just bought a GW 1997 with a 2001 V4 115 Yamaha 2 stroke. Love this rig and the motor has been a sheer pleasure to drive - it has 180 hours on it and is rock solid. I have 2 questions - both are probably no brainers for most of you and simple and very newish of me to ask so be understanding please that I am new to owning a boat and understanding outboards.
1. I was detailing and cleaning my boat and noticed a clear line (looks like a vacuum or fuel line hose) that runs from the motor, just under the motor cover, transom side and it was spliced and split near where it enters the inside of the boat (battery and fuel bulb area). I have run the boat for about 20 hours or so and never noticed this split in the line - I replaced/repaired the break in the line and all seems well - I am just curios as to what that line is? I cant seem to find a description on the Yamaha parts and manual sites?
2. The trim/tilt control on the boat remote control/throttle only works for trimming the motor down but does not work to tilt the motor up. I am quite handy with a wrench and wondering where i begin to determine if I can fix this and how to troubleshoot what issue may be.
Again thanks for the help and please excuse my newish questions - I am in learning mode. Greetz! James
1. I was detailing and cleaning my boat and noticed a clear line (looks like a vacuum or fuel line hose) that runs from the motor, just under the motor cover, transom side and it was spliced and split near where it enters the inside of the boat (battery and fuel bulb area). I have run the boat for about 20 hours or so and never noticed this split in the line - I replaced/repaired the break in the line and all seems well - I am just curios as to what that line is? I cant seem to find a description on the Yamaha parts and manual sites?
2. The trim/tilt control on the boat remote control/throttle only works for trimming the motor down but does not work to tilt the motor up. I am quite handy with a wrench and wondering where i begin to determine if I can fix this and how to troubleshoot what issue may be.
Again thanks for the help and please excuse my newish questions - I am in learning mode. Greetz! James
Comment