yamaha 200 saltwater series stalls when put into gear slow

[xandar11]

my yamaha saltwater series 2000 200hp stalls when put into gear slow.new needles in carbs,spark plugs,fuel pumps,filters,fuel tank and lines

[TownsendsFJR1300]

Whats nieddles ?

[xandar11]

do you mean forward control unit

[99yam40]

This thread is getting me confused

[boscoe99]

Seems to be a statement of fact. I don't see a question being asked.

Nothing to see here. Time to move on.

[TownsendsFJR1300]

Agreed on both ^^.

Just an FYI, there is no such word (or showing a slang) when doing a search on; nieddles

NEXT!!!

[DennisG01]

Shifting slowly... Don't do that. Shift quickly.

Although, I'm still confused by this:

do you mean forward control unit

Does who mean what?

[99yam40]

It was a ***** so let this thread die

[xandar11]

Seems to be a statement of fact. I don't see a question being asked.

Nothing to see here. Time to move on.

sorry i am only new to this i do need answers for my motor

[DennisG01]

sorry i am only new to this i do need answers for my motor

OK. Did you read post #7?

And, I think what the other guys were getting at (please correct me if I'm wrong) is that the information you provided was confusing. Sometimes, people will post something like this for no reason. Sort of like "spam" email.

[TownsendsFJR1300]

I see the correction for NEEDLES for the carb (from your first post). What needles are you referring to? The FLOAT NEEDLE??

You going to have to go into some detail, SPECIFICALLY what you have done.

If you can upload a video with audio would be a big help..

And PLEASE, THE MODEL # to the engine, should be a 4 letter code..

[DennisG01]

Scott, I was thinking it might be as simple as shifting too slow and engaging the shift cutoff switch too long (or possibly the switch is hanging up/flaky)? I know the main purpose of this switch is for coming out of gear, but it still cuts spark when going into gear, right? Or am I mistaken on that?

[TownsendsFJR1300]

Scott, I was thinking it might be as simple as shifting too slow and engaging the shift cutoff switch too long (or possibly the switch is hanging up/flaky)? I know the main purpose of this switch is for coming out of gear, but it still cuts spark when going into gear, right? Or am I mistaken on that?

It cuts spark going INTO gear. Coming out of gear, NOT sure, but, its a simple switch, simply activated on or off so it probably does cut spark momentaily.

It could be as you noted Dennis. The OP needs to post some legible/understandable information (or he's a *****)..

[xandar11]

salt water series

the engine no=feto x .when you put it in slow from 1000rpm to 1400rpm try to crawl it will stall.the motor has been serviced by a yamaha dealer and the part that your talking about is it in the forward con***** or on the engine the engine will run on idle and rev up in nuetral with the fast idle but soon as you put it in gear it stalls.thanks for any help needed.

[almetelo]

200FETO X depending on year may match with US S200TXR

Have a friend with a 150FETO/S150TLRu and had a similar problem and had water on fuel.

Carbs have been cleaned?
That happen after you dealer do the job?