Ok.... This has been going on for a while now and was hoping for some insight as to what you think the issue might be. I have a 05 50 2 stroke. It all started with a stuck float pin. I went the cheap route and rebuilt the carb (only the one with the stuck float pin) myself. Worked great for a few times out. But then all of sudden It would bogg down and not be able to get on plane. It would idle fine but when I got on the gas it would not have any power. It would do this a different times. There really wasn't any rhyme or reason as to when it was happening. After a lot of headache and this happening off an on for a bit I decided to have a mechanic go through the whole fuel system. He rebuilt all carbs, new plugs, drained all the gas ( even though it looked good to him ), water separator. Ran great for a few times out then it started to do it again. Had the mechanic come take a look at it on the water and of course it ran fine. We spent about 1.5 hours running it at all rpms and nothing. Worked great again for a couple of trips then AGAIN!!! He is out of town right now so I just wanted to throw it up here and see if anybody had any ideas. Thank you in advance!!!!
Drew
Drew
Comment