torque specs

[billygc45]

I'm about to change out a prop to my F60TLR and cannot find the tightening torque to the castle nut. Anyone know what the spec is or just use a snug turn to align the pin hole.
Having to change prop to allow for more thrust to get up on plane with a heavier load onboard...more than two adults with gear! I own a Sundance 17CCR. Anyone with that problem and how did you resolve?

[boscoe99]

After all else fails, follow the instructions.

The owners manual for the F60TLR specifies the nut torque as 25.8 ft-lbs (sic).

Correctly stated it is 25.8 lb-ft.

[billygc45]

Okay....thanks for the info.

[robert graham]

Without a torque wrench just good and darn snug will work fine....it's not brain surgery!....

[billygc45]

Would you happen to know the socket size needed for the prop nut? I have a torque wrench, but will have to purchase the correct size for the nut.
Thanks for your input.

[boscoe99]

I would.

22mm.