I’m having issue with my twin 2006 Yamaha 150 4 strokes. My swivel tubes on both motors seemed to have hardened grease from previous owner not using the correct grease or not maintaining properly.
I can’t seem to get grease out of the top bushings.
Im going to post some photos of what is going on.
i believe the grease is coming out the bottom but not out of the top bushing.
I’ve replace all hydraulics (helm, lines, ram). I’ve also paid a mechanic multiple hours to heat up the swivel tube with no luck.
Please to God help me! I’ve been dealing with this too long. My next guess will be drilling new zerk fittings in the top portion of swivel tube to try go get grease to the top.
I’ve also had suggestions to hold a old tshirt around the bottom bushing to help push up the new grease, however the grease seems to be coming from somewhere else not bottom bushing.
please please help like seriously
Comment