P150-Tlrv Carb settings

[LuvMySkeeter]

Hello all I'm new here. Hope someone could help me out. I have a 1997 Yamaha P150-tlrv. I would like to know the factory carb settings for carbs 1 thru 3. Thank you in advance.

[99yam40]

I cannot help with the settings, but why ask for just 1 to 3?

[LuvMySkeeter]

Because I only have 3.

[boscoe99]

I suspect that you have six carburetors. In pairs. 3 times 2 is 6.

Six settings to be made.

The base setting(s) will be found in the applicable Yamaha service manual.

[LuvMySkeeter]

Here is from my seloc manual. For my application it says the settings are 13/16 - 1 5/16 port and starboard 1 5/16 - 1 13/16.
Just confused. How do I achieve this setting.

[LuvMySkeeter]

Im assuming that's 1 complete turn and 5/16 of a additional rotation.

[walleye1]

Starting point 1 1/6 port 1 9/16 starboard.

[TownsendsFJR1300]

Im assuming that's 1 complete turn and 5/16 of a additional rotation.

The spec's are AFTER lightly seating the screws fully inward (clockwise). Then, turn them CC outward to those spec's (respective of each carb).

[pstephens46]

How you supposed to guage 1 1/6 or
1 9/16?

[99yam40]

just a RCH past one turn or 1 & 1/2 turns

[TownsendsFJR1300]

How you supposed to guage 1 1/6 or
1 9/16?

Use a socket..