The bottom #4 carb on my '99 F50 is gummed up and need cleaning. Engine only running on upper three cylinders. Evidence of wrenching on all of them. I have another set of carbs from a F40 in new condition. The jet sizes are the same in both carbs according to my manual. What can I expect if I do the swap? Should I forget about it and just disassemble and soak the original carbs?
EDIT--------------------------------------------------------
Looking at the Boats.net parts diagram, I found they are identical! Same part number.
EDIT--------------------------------------------------------
Looking at the Boats.net parts diagram, I found they are identical! Same part number.
Comment