A few days ago my F9.9 cut out in a few seconds while motoring at half throttle. Since then i determined I had no spark, constructed a DVA adapter and performed the suggested measurements from the workshop manual. However I am unsure what part to replace.
Battery is charged, motor cranks at normal speed
With the spark coil connected:
5V at the charge coil
0V at the ignition coil
With the spark coil disconnected
245V at the charge coil
236V at the ignition coil
Resistance of both ignition and charge coil measure ok.
I removed the flywheel, visually checked the charge coil, which seems alright.
This leads me to suspect either the charge coil or the ignition coil. I do however read that ignition coils almost never fail on the primary.
Any advice greatly appreciated.
Battery is charged, motor cranks at normal speed
With the spark coil connected:
5V at the charge coil
0V at the ignition coil
With the spark coil disconnected
245V at the charge coil
236V at the ignition coil
Resistance of both ignition and charge coil measure ok.
I removed the flywheel, visually checked the charge coil, which seems alright.
This leads me to suspect either the charge coil or the ignition coil. I do however read that ignition coils almost never fail on the primary.
Any advice greatly appreciated.
Comment