Tweet
converting my bayrunner baja 16ft. to center console my 1996 three cylinder 30 Yammy to remote have parts needed except all cables purchased 703 control box and all parts thru boats.net my question is how should I rout the rigging, on starboard side or port. Point of entry on motor is on starboard will this be to sharp of a bend with full rotation of the motor would it be better to go to port side.By the way found most all info on this conversion on here without posting one question except this one great site for info dealer was no help at all said it was to expensive that I should buy a new motor sure I will pull 7 grand out my you know what. All parts with a new aluminum fabricated console so far only about a grand minus cables.