6Y5 Multifunction gauge

[Gatorfan2]

I recently purchased a 6Y5 multifunction Tach gauge off Ebay, to pair with an 07 50TLR (2 stroke). I believe they may have mistaken the exact part number and I'm hoping someone can chime in and verify if this gauge will work for me and possibly know the correct harnesses I will need as well. It's the 2 button 6Y5 with 4 wire leads and (2) four prong plugs. I have set the dip switches to 2 lead, 6 pole and 2 stroke positions.

[fairdeal]

those dipswitch settings look right.

Boscoe should be along to provide the adapter harness part number

I think I know - but better to wait for a sure answer

[boscoe99]

those dipswitch settings look right.

Boscoe should be along to provide the adapter harness part number

I think I know - but better to wait for a sure answer

Go for it.

[fairdeal]

this?

[boscoe99]

That should do it.

Methinks Yamaha painted themselves into a corner going from two four pin connectors to a single four pin connector on the motor. The customer pays to get them out.

[Gatorfan2]

Thanks for the assistance, I'm going to send it and see what happens.