yamaha f150 -07 speedo meter *command link*??

[boscoe99]

yes i measured sender just like that and didn't got any readings...

that 69J-8A4L0-12-00 part is for cooling water pressure sensor, not for speed..
but if you scroll that link page down there is electronic speed sensor
P/N 60V-8A4L1-12-00

what difference is between these two pressure sensot kits...

60V-8A4L1-11-00
60V-8A4L1-12-00

looked from boats.net and P/N 60V-8A4L1-11-00 gives correct sensor kit and
60V-8A4L1-12-00 don't give any results...
so i still thinking 60V-8A4L1-11-00 is the right one

founded elsewhere:

Part # 60V-8A4L1-12-00

Superseded from Part #s 60V-8A4L1-11-00, 60V-8A4L1-10-00, 60V-8A4L1-01-00

so it's just improved part, but -11-00 will work too...

My mistake. I stopped at the first sensor I came to. You are correct. The speed sensor is down the page.

A -12 sensor kit is just an updated -11 sensor kit. The latest is now a -13. Wait a bit and it will be a -14.

[timppa83]

i ordered 60V-8A4L1-11-00, hopefully i manage to get speedo working with it...

i think i need to buy that trim sender allso, to get trim indicator working..

[TownsendsFJR1300]

Well, can't comment on the sending unit of the trim gauge.

When mine failed (my neighbors too), the switch was fine, that plastic "arm" broke...

Good luck..

[timppa83]

Trim gauge is working now...trim sender unit was connected but there was two pink wires what needed to connect together so trim info goes to lan network..those pink wires wasn't connected so thats the reason why gauge didn't show anything...