Multifunction 6Y5 Gauge

[marley03]

Good afternoon Yamaha Forum, first time on line. I have two F60CET outboards on the Whaler and have installed new fuel tanks including Yamaha fuel senders, on the gauge I have a white wire that I was told was the one wire to connect from the gauge to the sender, question, where does the other wire go from the sender?

[fairdeal]

black.

If it really is a Yamaha sender, check the setting of the dipswitch
(and also for what units of distance you want to use)

You have multiple tanks / senders? are you using some kind of selector switch between them and the gauge?

[boscoe99]

[marley03]

Thank you Fairdeal, by the chart you sent me, and the resistance of the fuel sensor the Yamaha dealer supplied me with is a ABYC 30 - 240 ohm, will check the both gauges tomorrow, I have two F60CET outboards with two sets of gauges and two fuel tanks, one each side, thank you again.

[marley03]

Thank again Fairdeal and Boscoe99, you have given me the information to get both these fuel tanks operational, have a great day.