Tweet
Please help. Decided to replace all of the original gauges & rocker switches as well as add some LED lights & now the trim doesn’t work & the motor won’t start. I pulled the wires from the old gauges & switches & put hem right back on the new parts. As far as I can tell, the only thing I “changed” was one red power wire coming off the harness was connected to a power wire for the fish finder & something else with a wire nut (from the previous owner) so I ran it to a block & then ran power & ground wires off the block to the LEDs & the fish finder. The new lights, fish finder and a couple of the gauges power on but the trim won’t work & the motor won’t turn over. Any ideas? Thank you in advance.
Comment