Hi fellas. Couple years ago I had oil transfer problems. This forum helped me figure out my ECU was bad. Once I replaced it, my oil transfer issues stopped. However recently I have had a new perplexing issue. When I turn on the motor immediately the alarm sounds. The gauges do not reflect what’s going on with the alarm -meaning oil says it’s full both tanks are full -transfer is happening like it should. If I jiggle the key switch it will turn off or sometimes I have to flip the key switch off and then back on superquick and then it stops. Once the alarm is off, anytime after this that I turn the motor off and then turn it back on the alarm does not sound again. I’m thinking it could be something related to the key switch. Any help would be great!
Announcement
Collapse
No announcement yet.
2001 150 txrz
Collapse
X
Comment