Yamaha F80b water pump

[Olsvik123]

Hi!
i recently bought a Yamaha f80 and i have replaced the water pump and i am wondering if its supposed to come water out where the speed hose runs out? See video.

[walleye1]

Look's good to me.

[99yam40]

that is a lot of water, but I never looked at a F80B idling on a hose before so nothing to compare it with.

are you sure you got all if the seals into the pump where the up pipe goes ?
maybe the rubber seal got pushed out of place when stabbing the lower unit back on.

[Olsvik123]

Cant find any rubber Seal between waterpump and cooling pipe. Should there be?

[pstephens46]

What year is it? Outside the US?

[fairdeal]

I can imagine that I see a "Damper, water seal" in the photo above

[Olsvik123]

What year is it? Outside the US?

Europe, F80B 2008 model

[Olsvik123]

I can imagine that I see a "Damper, water seal" in the photo above

I think the water Seal is inside the pump housing. So i guess is ok. I have a solid tell-tale

[pstephens46]

I think the water Seal is inside the pump housing. So i guess is ok. I have a solid tell-tale

No. According to what Fairdeal posted you appear to be missing the bushing/seal.

[pstephens46]

No. According to what Fairdeal posted you appear to be missing the bushing/seal.

Edit...I can’t tell if the seal is under that plate or not. Maybe remove the screws and have a look.

[99yam40]

the water pump kits I get include the pipe seal,
did you put a new one in?