correct 'gasket maker' for crankcase

[rodbolt17]

clean the surface with anything that wont leave oils.
use loc-tite 518.
DO NOT use the primer/activator.
it kicks off gel-seal or 518 so fast the sealant will be a shim and other parts wont fit. like the pulser assembly or the stator assy on a mid 80's jonny/rude 35.

[Kingfish999]

didnt know this thread was still going. ended up using the Permatex anaerobic without the activator. assembled fine haven't seen any issues so far with break-in