I have an 09 Yamaha 50hp 2 stroke outboard that has run rough at idle up to 1800 rpms since the day I got it. Otherwise it runs perfectly. I went through the whole dealer service deal and at the end was told it's normal by a Yamaha service rep. His reason for the misfire was that it was set very lean to pass EPA and they could not by law change it. After the engine was out of warranty I adjusted the rich/lean myself and it had no affect on the idle.
I heard from a fisherman that runs Yamaha that you need to index the plugs to get it to run well at idle. So today I got 6 new plugs and marked the insulator at the side of the ground strap and kept trying plugs until I got all 3 cylinders to line up the exhaust side with the ground strap. Then I tested the engine, it was a vast improvement. It is a 3 cylinder engine, so it's not going to run like a v12, but it does not rattle the bimini top like it used to. I thought I would pass this on since I could not find anything on it when I did a search.
I heard from a fisherman that runs Yamaha that you need to index the plugs to get it to run well at idle. So today I got 6 new plugs and marked the insulator at the side of the ground strap and kept trying plugs until I got all 3 cylinders to line up the exhaust side with the ground strap. Then I tested the engine, it was a vast improvement. It is a 3 cylinder engine, so it's not going to run like a v12, but it does not rattle the bimini top like it used to. I thought I would pass this on since I could not find anything on it when I did a search.
Comment