Wiring color code: Yamaha Enduro 60?

[adaco681]

Could someone advise as to the wiring code for my Yamaha Enduro 60?. The wiring sheath from the motor has a white, red, yellow, blue, brown black and green wire.
I want to check out the existing switch (suddenly I have no power to motor, accessories, bilge pump, but battery fully charged and tested).
Thanks.

[boscoe99]

[adaco681]

boscoe99:
Thank you very much. That is exactly what I needed.
adaco681

[TownsendsFJR1300]

(suddenly I have no power to motor, accessories, bilge pump, but battery fully charged and tested).
Thanks.

If you don't have power to the accessories, bilge pump, etc, and then the engine, the issue is likely in the main battery cable, loose, corroded, bad ground, bad Pergo transom mounted on/off both switch(crappy contacts) if installed.

I'd start at the battery and work your way backwards to any aftermarket switches, etc, checking for voltage or lack of.

[TownsendsFJR1300]

RELATED SECOND THREAD, same issue:

http://www.yamahaoutboardparts.com/f...h-th23129.html

[Bilge Rat]

Your problem is not in the motor wiring.
Check from the battery thru any battery switch to the motor.
Check the positive AND the ground connections.