Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Trim ram lip seal removal. Yamaha 225 2005

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trim ram lip seal removal. Yamaha 225 2005

    Hi All,
    I am hoping someone may be able to help me.
    Yamaha 225hp 2005
    I have a suspect leaking lip seal on one of the trim rams. I have ordered two spares and now planning for the removal of the old one.
    It appears to be just held in with a retaining clip and therefore no need to remove the metal end cap with the four holes. Please can someone confirm if just the clip is holding the seal in place? As I think the end cap will be very difficult to remove. I was once told the seals could be removed by just screwing in a self tapper screw into the lip seal and pulling out with pliers...... Any information will be greatly received.
    Many thanks

  • #2
    I believe the part you are looking at is not a seal, it is a dust wiper to keep the junk out of the unit.

    leaking seal should be the O-rings inside

    Comment

    Working...
    X