If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Have you ever measured your F225 fuel rail pressure? What do you see at key on, engine off and then when the engine is idling? Damn if I can find anything published by Yamaha.
at key on I usually see 35-40 PSI, idling between 33 and 38 psi.
at or near WOT 38 to 40 PSI.
however I have only measuered a few hundred in the past 18 yrs.
and my guage has not been through any metcal programs.
at key on I usually see 35-40 PSI, idling between 33 and 38 psi.
at or near WOT 38 to 40 PSI.
however I have only measuered a few hundred in the past 18 yrs.
and my guage has not been through any metcal programs.
Shame on you. And we refer to you as gospel.
Gotta talk to my Minister.
Comment