No fuel pressure at the Shrader valve. What and where do I check. It was cranking and idling fine but would start spluttering above 2000 rpms. I ran it for a little bit too see if it would straighten out but it didn't so I went to load it back up ,when I got to the dock it died and hasn't cranked since . I put new plugs its firing,injectors are firing that's when I checked the fuel pressure and now I'm LOST!!! Any help on what I can do would be greatly appreciated.
Announcement
Collapse
No announcement yet.
2006 300 hpdi no fuel pressure
Collapse
X
-
Originally posted by rodbolt17 View Postnow we have to check the medium pressure pump.
with the ign on, disconnect the blue pump wire.
jump the blue wire to ground. pump should run.
if not check the fuses and the main relay.
Comment
-
Originally posted by sahàrajeepn View PostWell its definitely the fuel pump, took it out this morning and its not working. I'm a car guy and I can't believe that pump is $600 plus!!! I can buy a pump for a 1000 HP LS motor for that !!!! Boat motors ya gotta love em lol
You will come to believe that marine parts are being given away.
Comment
Comment