My unit - 6G1 (8HP) 2-stroke, electric start long shaft.
The shifter will jam in neutral position when shifting between FWD and REV. Shifting back to Gear you just came out of resolves it most of time, meaning I can then shift to other goear. However, sometimes it takes more than 2-3 tries, not good in tight quarters. Any suggestions on causes before I do a tear down?
The shifter will jam in neutral position when shifting between FWD and REV. Shifting back to Gear you just came out of resolves it most of time, meaning I can then shift to other goear. However, sometimes it takes more than 2-3 tries, not good in tight quarters. Any suggestions on causes before I do a tear down?
Comment