Charging issue

[medicineman]

Thanks for all the help everyone. Got the lighting coil installed today and everything went well. Only item I was off on was socket size. I ended up being able to break flywheel but with a 1 1/4, but it was slightly too large. I realize it was probably a 30 mm, or something close to that but I did not have that size. 1 1/8 was too small and no 1 3/16 available for me. Outside that everything was a piece of cake thanks to the members here that shared their knowledge.

[99yam40]

you need to get metric tools if you will be working on metric motors
Oh yea, if you have not read about it before a loose battery connection can take out RR.
keep those connections tight

[medicineman]

Have most metric items, just not much when you get that large. And yes, will check connections frequently

[99yam40]

same with me have most tools I need until I find out I do not have what I need