Powerhead replacement

[flharris]

Need to replace my 2004 vmax 3.1L 200hp.
best place to order from?
quick turn around?
thanks in advance.

[TownsendsFJR1300]

Replace or rebuild and YOUR location??

[boscoe99]

www.chriscarsonmarine.com for a rebuild/remanufacture.

www.boats.net for a new block.

If we knew the model of the motor we could tell you if parts are available from Yamaha.

[flharris]

Townsends FJR1300 which ever way would be
the most cost effective?
Location: Columbia SC

[99yam40]

Townsends FJR1300 which ever way would be
the most cost effective?
Location: Columbia SC

cost effective is a strange way of wording cheaper maybe

, but are you looking for what is readily available close to you?

Boscoe posted places to look with your proper model #

[robert graham]

Pine Crest Marine in Lexington,sc only a few miles from Columbia.....maybe go talk with them about it?....

[cousinabe]

Need to replace my 2004 vmax 3.1L 200hp.
best place to order from?
quick turn around?
thanks in advance.

http://www.boats.net/parts/detail/ya...100-03-1S.html

[TownsendsFJR1300]

http://www.boats.net/parts/detail/ya...100-03-1S.html

That's JUST THE CRANKCASE..

No crankshaft, pistons, rods, bearings, etc. (Not even a short block-Just the empty block)

[cousinabe]

That's JUST THE CRANKCASE..

No crankshaft, pistons, rods, bearings, etc. (Not even a short block-Just the empty block)

you are correct... just looking and saw #1 is obsolete. 66X-W0090-15-1S

[TownsendsFJR1300]

you are correct... just looking and saw #1 is obsolete. 66X-W0090-15-1S

Boscoe and RB would know, but I've never seen a powerhead (complete) in the "parts section". But for warranty work, they are available for at least dealers..

[walleye1]

Call Boats..net

[boscoe99]

Boscoe and RB would know, but I've never seen a powerhead (complete) in the "parts section". But for warranty work, they are available for at least dealers..

If you are talking about what is known as a "dressed power head" they are not available from Yamaha as a spare part. Dressed meaning that it has everything on it that one would see if they removed the cowl from a brand new motor.

What Yamaha has been known to do is to take a brand new motor, remove the dressed power head, and send it to a dealers facility for a Yamaha mechanic to install same.

[flharris]

Thanks everyone for the input
i am look for a complete power head!
was looking to pull the blown one and installed new
one, my CFO ready for a boat ride!!

[boscoe99]

New power heads (undressed) appear to now be obsolete. No longer available from Yamaha. Part number 66X-W0090-15-1S that is, if that is the one that is applicable to your model.

I still have no idea what model motor we are talking about. You guys are so tight with models you should work for the White House to help stop leaks.

[pstephens46]

Z motor?????