I have a 2001 yamaha 115 TXRZ with a push to choke on the key. I have noticed that when I push to choke, I hear it click on the engine but it does not close the flap to the carbs. This is because the top part fell off cause there is no locking device (clip, pin, etc...). What part do i need to keep that rod connected. I couldn't find it in the schematic. All it can find is the manual choke n the drawings. Thanks for any help and sorry for the non mechanical verbiage.
Announcement
Collapse
No announcement yet.
Push to choke
Collapse
X
Comment