multisensor-triducer 6Y9-83688-00

[penachoj]

Hello:
I would like to make an inquiry about one of your product.
I have an engine outboard Yamaha F300 with a command link plus display 6Y9-83710-01.
According to rigging Order guide I have to connect to connect the COMMAND Link plus multisensor-triducer (6Y9-83688-00-00) to the command link plus network using harnesses connected to the BUS.
I would like to know if it is possible to connect directly to DEVICE using this two harness (6Y9-83553-00 ) and (6Y8-82521-01)?
Best regards

[boscoe99]

Just buy the kit and install per the diagram below. It is simply plug and play. You will need a main bus harness of the appropriate length as well.