Looking for advice please. I have a Yamaha 85 aet pre mix power trim motor. I have found it has become very heavy on fuel. There is quite a bit of fuel mix ( the fuel that runs out is quite substantially oily) running out from the front of the carbs if I tilt the motor say when we get to a shallow area and switch off. The motor also runs on after switching off the ignition for around 5 to 10 seconds.
I am mixing oil fuel 50:1. shell nautilus
For example we ran around 5km or so on the weekend . Some at 4000 rpm and some around 2500rpm from spot to spot fishing. We used around 10 to 12 litres of fuel.
Any help please.
I am mixing oil fuel 50:1. shell nautilus
For example we ran around 5km or so on the weekend . Some at 4000 rpm and some around 2500rpm from spot to spot fishing. We used around 10 to 12 litres of fuel.
Any help please.
Comment