If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
2003 yamaha 90hp, tilt works in up mode but won't go down. I can hear the relay clicking and after several tries the tilt will go down. which part do I need?
if you can hear the relay operate but it is not making the proper connection to run the motor then I would be looking at the T&T relay.
seems like the switches are working if they cause relay to operate
Tweet
Comment