command link hookup on t60tlr motor

[CHASENFISH]

need some help.hooked up command link round tach and all that shows is rpm and hours and trim.hours show 0 and I can't get it to go into the mode to reset trim.none of the other functions show on the screen as in battery voltage,oil pressure,engine temp.is this all that it will show on a 2008 t60tlr or am I not doing something right? I have the installation manual and the operating manual. thanks!!!! first time on forum

[boscoe99]

Look carefully at the two gauges below. They look very similar. If you see Yamaha at the top in white that is not Command Link.