The motor is a 2001 VZ200TLRZ with about 600 hours.
The problem is that the oil tank on the engine over fills and drains in to the air baffle.
Over the last couple of months I've replaced both the oil level sensor and the strainer and also replaced the foam gasket at the bottom of the strainer. The float on the sensor is free to float properly and I can see nothing making it hang up.
Any ideas on what else it could be?
Thank you!
The problem is that the oil tank on the engine over fills and drains in to the air baffle.
Over the last couple of months I've replaced both the oil level sensor and the strainer and also replaced the foam gasket at the bottom of the strainer. The float on the sensor is free to float properly and I can see nothing making it hang up.
Any ideas on what else it could be?
Thank you!
Comment