Tweet
I have a 2003 yamaha 130hp txrb. I'm planning on cleaning my carbs because my engine isn't running right. I haven't cleaned since i bought the boat. I have a few questions on a few things. I have a service manual but not the best. In the diagram for the carbs i can't find the jets that need to be set. I know you have to count how many times the screw rotates but i don't know which screw that needs to be seated correctly. Can someone show me which screw it please thanks. I have never done this before but I would like to learn. Thanks guys i appricate it.
-
-
its dirt simple.
only screws that need adjusting are the pilot air screws.
7/8 of a turn out from lightly seated.
floats set at about .63" with the gasket in place.
the rest,just make sure its clean. -
Ok awesome, I'm going to get at it today. Is it best to use a ultrasonic cleaner ,just spray carb cleaner or leave it in a small bucket full of carb cleaner?Comment
-
What number is the pilot air screw?Comment
Comment