Tweet
got my kit today all parts appear to be there, talked to the tech and he verified o-ring are all there, next question, in the manual it says I should put a Yamaha water proof greese on the gaskets. Any suggestions on if you recommend this or what else could I get at a local parts store??
-
-
ok, thanks will look tonightComment
-
no grease.
dry.
you should have six orings of roughly the same ID and OD.
3 will be MUCH thinner than the others.
the thin ones go under the needle seat.
if you only have 3 orings in the kit you will need to buy the needle seat orings.Comment
-
Well got home friday and got 2 carbs done and the third before I mowed the grass, let the batteries charge while I did that, and then it was judgement day.
Engine fired right up no leaks and ran right at 1000 on idle and man does it sound strong. Thanks for the tips....
Comment
Comment