Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Help troubleshoot FM gauge

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help troubleshoot FM gauge

    I have twin 2003 F225s with round gauges. My FM gauge reset total burn each time engine was turned off. I installed a new gauge today and now the FM gauge does not even turn on.

    I connected the wires as they were. Color coded with quick disconnect plugs.

    I also searched this forum and found the installation guide. I will double check the install but was hoping to get some advice as far as trouble shooting before I dive back in. Also, is there a color wire schematic. The PDF I found is b&w.

    Thanks!

    Cbdpm@bellsouth.net

  • #2
    Check for 12 volts between yellow and black wires at gauge with key on, recheck wire connections.
    Regards
    Boats.net
    Yamaha Outboard Parts

    Comment

    Working...
    X