No oil transfer from main tank to engine oil tank

[bajakeith]

remote oil tank

on the remote oil tank the 2 wires from pump to the bullet connectors are copper and not tinned !! (BAD!) and the bullet connectors never get any love (oil/grease) and like to crusty!! about 4" above the pump and you will need to remove the oil line out of the hole that holds it to the tank to access said bullet connectors..........

[Robado1967]

Ha! Ha! You know real men don't read instructions !!! Will I did read them and it looks like it covers a couple different engines and they should tell you if your taking off and older module with no wire you must STILL install the new one with the new wire!! But anyhow I sent the module back and got my money back. Thanks for all your help with out this fourm I would still be pulling out my hair!!